Plastic roller blinds

Request a quote

… or all us +358 50 5169169

Plastic roller blinds

Roller blinds are an excellent choice for protecting machinery in tight spaces. Roller blinds require less space than way covers and are easier to install than traditional way covers. We supply ready-to-install acid- and rust-resistant roller blinds with or without casing.

For more information, please call us, contact us using the contact form at the bottom of this page, or email us at

Installation and pre-tensioning

Roller blinds can be attached with standard steel angles (Figure 1) or other steel angles that meet your requirements most effectively. Before installation, adjust the pre-tensioning:

  • by turning the flat metal tip (Fig. 2) in the direction opposite to the roll-out direction of the roller blind
  • by turning the cylinder arm with hex key DIN 911 (Fig. 3) and tightening the screw (Fig. 3, 1)

Casing (upon request)

Steel roller blinds

Type SR

Roller blind with steel blind at a thickness of 0.20, 0.25, 0.30 or 0.40 mm.

Type SRF

Roller blind with separate spring steel blind

  • Cover blind is easily replaceable
  • Retraction shade in blind widths ZB1 and ZB2
  • Easy roll-out and retraction


Type SRS

Same as SRF but equipped with an additional lubrication system.

All three types can be delivered with the casing and shade end design of your choice.

Trusted by

Frequently asked questions

Maxjas Oy supplies way and bellows covers, chip conveyors and way lubrication equipment, machine guards, cable channels and other accessories for machine tools. We offer extensive maintenance services for way covers for machine tools and comprehensive life cycle services for our way covers.

At the latest, way covers should be serviced when they become visibly worn, dented or damaged. However, maintenance is best done pre-emptively, which is why Maxjas recommends regular, annual maintenance for way covers. By following that approach, the covers will last longer and production is shielded from unexpected shutdowns. 

If you do not know whether your way covers require maintenance or not, you can arrange for Maxjas to evaluate the condition and remaining lifetime of the covers free of charge.

In terms of maintenance of way covers, we replace section wipers, smooth section surfaces, replace any worn or damaged slides, bearings, brass and other parts. Each repaired cover is tested before return to the customer. Before each maintenance service, the client is given a cost estimate and details of the work to be done. On request, we can also carry out installation after maintenance.

We can procure way covers for any machine. We can take the measurements from the old cover and provide a new one quickly and at a competitive price.

Our life cycle service helps companies to get a better understanding of maintenance as a whole and to be prepared for the next step in maintaining their way covers. With our life cycle service, we identify and classify the way covers sent to us according to their condition. When the cover’s next estimated maintenance date is due, we already know what work needs to be carried out. 

This enables us to accurately monitor the development of the way cover’s condition and provide a new cover for our client in time, before the way cover reaches the end of its life. This in turn creates continuous savings for our clients and prevents unnecessary production downtime.

Request a quote

… or all us +358 50 5169169